|
New Holland Series TND & TNS Tractors
New Holland is established
as a leading manufacturer of premier quality products. This leadership
has been achieved by ensuring all New Holland products are designed, engineered
and manufactured to the highest standards.
Small Tractors Engineered for Demanding CustomersNew Holland TND and TNS have been designed to meet the needs of those who demand high performance from a small tractor. A good power to weight ratio, high specification and rugged built are established basics for all New Holland tractors. The TND and TNS series built on this by not only offering tremendous power in a compact package but also a wide choice of specifications.A TND or TNS series tractor can be built to satisfy a wide range of customer applications. TND models are offered in both two and four wheel drive. The TNS series share the same basic features as the TND four wheel drive models but are equipped with the unique New Holland SuperSteer™ Front Axle as standard. This axle enables the highly maneuverable TNS tractor to turn tighter, without brakes, than many two wheel drive models. Automatic four wheel drive management is another standard feature of the TNS models. Advanced and innovative, the TND and TNS Series feature:
This high specification can be enhanced to include:
New Holland the Power to PerformTND and TNS tractors are powered by rugged three-cylinder lveco 8000 series engines. Specifically tuned and developed to produce maximum power at a low rated speed of 2,300 rpm, these engines are quiet, smooth running and fuel-efficient. Their lower running speed also helps to reduce wear.Their engines are fully emissionised to meet current and known future emission standards worldwide. This has been achieved by maximising engine efficiency. Fuel consumption, in relation to power, output and torque production, is optimised by using an advanced combustion chamber design and a high perforance fuel injection system. In operation, however it is the performance operators will appreciate. Torque rise is up to 36% on the TH75D and TN75S models. This outstanding characteristic is matched to low specific fuel consumption across the range of engine speeds. Running costs are reduced without compromising productivity. Vibration levels are exceptionally low. Noise levels are also well contained, with the muffler mounted under the engine hood. TND and TNS tractors are exceptionally smooth and quiet running. As with all Hew Holland products, the engine is designed to offer rugged reliability. Extended oil change intervals combined with simple routine maintenance to ensure performance and reliability are sustainable over extended operating periods. Advanced Performance for Greater Productivity
By offering aTND or TNS tractor with a 32 forward, 16 reverse speed
Dual Command and Power Shuttle transmission, New Holland is able to meet
the needs of the most demanding customers. Dual Command Transmission provides
two Powershift speeds in each forward gear. This enables the operator
to change speed within the selected gear under full load. Such an advanced
feature is usually reserved for larger tractors and is proven to increase
productivity and versatility in a broad range of applications.
The Powershift can be used to reduce forward speed by 18% and increase torque by 27%. This is a useful feature in applications where conditions are variable allowing the operator to quickly reduce speed and increase torque without changing gear or losing traction. Dual Command Transmission is linked to a Power Shuttle. This enables direction changes to be made quickly with forward and reversed speeds being matched. The system modulates power engagement to smooth direction changes. The shuttle lever is conveniently mounted to the left of the steering column. It is simply moved back or forward to change direction. A neutral position is also provided. The modular design enables New Holland to offer Dual Command Transmission with an additional 12 creeper speeds. This provides a total of 44 forward speeds. When it comes to versatility, few tractors match the abilities of the TND and TNS Series. Choose the system to match the Application
Available in two and four
wheel drive models, the TND Series deliver excellent performance.
Offered with a choice of mechanical or electro-hydraulically controlled
rear differential locks, a four-wheel drive TND is also offered
with a limited slip or fully locking front differential to suit customer
needs. Four-wheel drive TND front axle differential locks work
automatically in conjunction with the locking rear differential to deliver
maximum traction.
TND models feature New Holland's award winning fully automatic four-wheel drive management system. Four-wheel drive is automatically engaged when:
Four-wheel drive is automatically disengaged when:
The unique new holland SuperSteer front axle delivers truly outstanding maneuverability. As the front wheels turn, the axle pivots to increase the effective steering angle to as much as 76 degree. Not only does this give the TNS tractor a tight turning a tight turning radius, it works in combination with the automatic four-wheel drive system to reduce tyre wear. Versatile PTO & Hydraulics For Every Application
A mechanical hydraulic system
is available on both TND & TNS models. It features New Hollands
proven FlexionBar lower link draft sensing, is simple to operate and benefits
from Lift-O-matic rear linkage control. Uncomplicated but highly effective
lift-O-matic using a single control, will raise and lower an implement
to pre-set levels. Standard hydraulic oil flows on all TND &anp; TNS
models is a generous 46 litres/min. Where additional capacity is required
New Holland can offer the 67 litres/min MegaFlow alternative. Until oil
flow is required, the main hydraulic pump runs at idle, resulting in minimum
power losses and reduced fuel consumption. Up to four double-acting auxiliary
valves can be specified. Each has four position settings - raise, lower,
neutral and float. Two of these valves can be controlled by a single joystick
control.
This enables each valve to be operated independently and simultaneously, with the operator retaining complete control. The joystick is ideally suited to multi-functional accessories. It is also fully integrated into the hydraulic system and provides excellent feedback. Where productivity and flexibility need to be linked, few tractors will match the versatility of the TND & TNS Series hydraulics. Versatile PTO Choose the System to match the Application
Both TND & TNS
tractors are offered with EDC, Electronic Draft Control. EDC makes it
easier to get the very best from the tractors not only in draft work but
also when working other mounted implements.
New Holland has arranged the EDC controls in three distinct areas. The depth setting control knob is mounted separately on the right fender. Positioned to enable working depth to be adjusted simply and precisely, the the knob has an adjustable stop setting. Lift-O-matic is placed next to the differential lock switch. Both can be operated at the same time. This allows the operator to release and engage the differentials manually as the implement is raised and lowered. The setting controls for draft and position control, maximum link height, maximum depth and the speed of implement drop are all mounted on a panel at the rear of the right fender. Positioned to be easy to reach in work, they are also placed to prevent them being altered accidentally. EDC offers:
Putting the Operator in Comfortable Control
New Holland recognises that
a smaller tractor can be used in applications that are equally as demanding
as those faced by larger machines. A small tractor needs to be just as
quiet and comfortable as larger models. Considerable effort has gone into
the design and manufacture of the TND and TNS Series cab. It provides
a class leading operating environment. All round visibility is excellent
and noise levels are low. But there are other aspects that really make
the TND and TNS models pleasant to work with. The cabs are spacious
and the quality of the fittings and the layout of the controls bring the
cabs specification up to a level normally associated with much larger
machines.
Features include:
The cab can also be specified with an opening front window and an air suspension seat. Purpose designed air conditioning can also be fitted without altering overall cab height. The TND & TNS Series set new standards of operator comfort in this class of tractor. High Quality Backup ServiceNew Holland offers proven after sales support through its comprehensive Dealer Network. As a tractor range, the premier quality TND & TNS Series offer excellent performance. Linked to New Holland's after sales support, TND & TNS tractors offer a unbeatable package.New Holland listens to customers. Just take a look at the care New Holland has taken to make these tractors easier to maintain. The one piece engine hood rises on gas struts giving full access to the engine, ancillaries and filters. Both routine and major servicing is made much easier. The layout of all components is also designed to make maintaining the tractor easier. Another key to New Hollands after sales support is the company's proven parts supply system. Global parts distribution centres are linked via a computer system. All these advances combine to keep downtime to the absolute minimum. Parts distribution centres also hold stocks of parts for machinery that is no longer in production. These parts can be quickly ordered by dealers and further underline New Holland's commitment to customers old and new. Purchasing a new traactor calls for careful consideration of specification and performance needs. Your local New Holland Dealer has the experence and facilities to help you. New Holland "Investing in your future".
|
